Avidyne Entegra EXP5000 Installationshandbuch PDF herunterladen (Seite 32)

Figure 5: Heading Configuration with SkyWatch

Figure 4: Heading Configuration with StormScope

Configuring Map Heading from TAS (Traffic)

Figure 3: Heading Configuration with GPS/FMS

Configuring Map Heading from StormScope

Installation Manual

Wiring External Devices P/N 600-00175-000 Rev 04

- 22 -

Configuring Map Heading from a GPS/FMS

The MFD can receive heading from an GPS/FMS via an ARINC 429 bus. The source of heading is

usually a gyro transmitting synchro or stepper to SkyWatch or StormScope sensor connected to the

GPS/FMS, as shown in Figure 3.

See Appendix G: GPS/FMS System Wiring, on page 96 for the correct pinouts to the MFD.

When checking the GPS/FMS connection to the EX500/EX600, the GPS/FMS must have a valid

position fix (latitude/longitude).

The MFD is capable of receiving heading data from the WX-500 StormScope via RS-232. Configure

the MFD as shown in Figure 4:

The EX500/EX600 is capable of receiving heading data from a TAS system. Configure the MFD as

shown in Figure 5. See Appendix I: Traffic Sensor Wiring, on page 98 for the correct pinouts to the

MFD.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 123 124

Keine Kommentare

Avidyne Entegra EXP5000 Installationshandbuch Seite 32